Heat Shrink Bus bar Insulation Tube

High Voltage Heat Shrink Bus bar Insulation Tube

Summary for High Voltage Heat Shrink Bus bar Insulation Tube

MPG High Voltage Heat Shrink Bus bar Insulation Tube can avoid short circuit fault caused by small animals such as mice, snakes etc. After using heat shrink bus bar insulation tube, it can avoid accidental injure to overhaul persons when they enter electriferous clearance by mistakes. Heat shrink bus bar insulation tube prevent bus bar from chemical corrosion effected by strong acid, alkali, salt etc. Heat shrink bus bar insulation tube solve the problem of insulating among bus bars in bus duct , Heat shrink bus bar insulation tube provide excellent insulation performance to supply enquired flashover protection for the bas bar system. .
Color: Red, yellow, green, black

Specification Table of MPG High Voltage Heat Shrink Bus Bar Insulation Tube

*Heat shrink bus bar insulation tube* Mode& specification(mm)		*Heat shrink bus bar insulation tube* Product specification(mm)	*Heat shrink bus bar insulation tube* adaptable width of the bus-bar(mm)
MPG10-C-25/10	MPG10-C-25/10	φ25×1000	20~25
MPG10-C-30/12	MPG10-C-30/12	φ30×1000	25~30
MPG10-C-40/16	MPG10-C-40/16	φ40×1000	35~40
MPG10-C-50/20	MPG10-C-50/20	φ50×1000	45~55
MPG10-C-65/26	MPG10-C-65/26	φ65×1000	60~70
MPG10-C-75/30	MPG35-C-75/30	φ75×1000	70~80
MPG10-C-85/34	MPG35-C-85/34	φ85×1000	85~95
MPG10-C-100/40	MPG35-C-100/40	φ100×1000	100~115
MPG10-C-120/48	MPG35-C-120/48	φ120×1000	120~130
MPG10-C-150/60	MPG35-C-150/60	φ150×1000	140~160
MPG10-C-180/72	MPG35-C-180/72	φ180×1000	170~190
MPG10-C-200/80	MPG35-C-200/80	φ200×1000	195~210

Note: 10 kV continuous length bus bar tube

Type Demonstration for MPG High Voltage Heat Shrink Bus bar Insulation Tube

Technical Data of MPG High Voltage Heat Shrink Bus bar Insulation Tube

No.	*Heat shrink bus bar insulation tube* Test items	*Heat shrink bus bar insulation tube* Standard requirements	*Heat shrink bus bar insulation tube* Test result
1	1min phase-phase power frequency withstand test for the *Heat shrink bus bar insulation tube*	42kV no flash and no breakdown	42kV,1 min,no flash and no breakdown sample
2	phase-phase impulse voltage test for the *Heat shrink bus bar insulation tube*	75KV 15 times phase-phase impulse withstand test of the positive and the negative respectively, no flash and no breakdown	75kV 15 times phase-earth shock withstand test of the positive and the negative respectively; no flash and no breakdown sample
3	1min phase-earth power frequency withstand test for the *Heat shrink bus bar insulation tube*	42kV no flash and no breakdown	42kV,1 min, no flash and no breakdown sample
4	phase-earth impulse-voltage test for the *Heat shrink bus bar insulation tube*	75KV 15 times phase-earth impulse withstand test of the positive and the negative respectively; no flash and no breakdown	75kV 15 times phase-earth shock withstand test of the positive and the negative respectively; no flash and no breakdown sample
5	temperature rise test for the *Heat shrink bus bar insulation tube*	the temperature rise of the copper should not over the bare copper＇s when the insulated tube shrunk in the below 40℃surrounding.	the temperature rise of the bare copper: 47.7℃ the temperature rise of the insulated copper bus-bar:41.4℃
6	Withstand test of the heat-shrinkable tube for the *Heat shrink bus bar insulation tube*	20kV, 1min no breakdown	20kV, 1min no breakdown