Heat Shrink Tube

Heat Shrink Tube
(Heat Shrinkable Tube is also called Heat Shrink Tube )

Summary for DRS (ZRG) Low Temperature Flame Retardant Heat Shrink Tube

DRS (ZRG) Low Temperature Flame Retardant Heat Shrink Tube are used in a wide range of area in the military & aerospace sector,automotive,electronics including: heat shrink tube for Cable Insulation, Heat Shrink Tube for Protection , heat shrink tube for Mechanical, heat shrink tube for Marking & Bundling of electronic components, heat shrink tube for Strain Relief ,heat shrink tube for Abrasion Protection ,heat shrink tube for Moisture Protection . DRS (ZRG) Low Temperature Flame Retardant Heat Shrink Tube have good abrasion resistance and impact ,environmental sealing, insulating. For a heat shrink tube only a heat gun can shrink them, so they are easily and widely used.

Specification Table of DRS (ZRG) Low Temperature Flame Retardant Heat Shrink Tube

*heat shrink tube* Specification (mm)	Hheat shrink tube Inner Diameter before Shrinkage (mm)	*heat shrink tube* Inner Diameter after Shrinkage(mm)	*heat shrink tube* Wall Thickness before Shrinkage (mm)	*heat shrink tube* Wall thickness after Shrinkage (mm)	*heat shrink tube* Continuous package length of the product (m/spool)
1.0/0.5	1.3±0.3	0.5±0.1	0.185±0.05	0.37±0.05	200
1.5/0.75	1.8±0.3	0.75±0.1	0.19±0.05	0.38±0.05	200
2.0/1.0	2.3±0.3	1.0±0.1	0.19±0.05	0.38±0.1	200
2.5/1.25	2.8±0.3	1.25±0.1	0.20±0.05	0.40±0.1	200
3.0/1.5	3.3±0.3	1.5±0.1	0.20±0.05	0.40±0.1	200
3.5/1.75	3.8±0.3	1.75±0.1	0.20±0.05	0.40±0.1	100
4.0/2.0	4.3±0.3	2.0±0.1	0.21±0.05	0.42±0.1	100
5.0/2.5	5.3±0.3	2.5±0.2	0.21±0.05	0.42±0.1	100
6.0/3.0	6.4±0.4	3.0±0.2	0.21±0.05	0.42±0.1	100
7.0/3.5	7.4±0.4	3.5±0.2	0.21±0.05	0.42±0.1	100
8.0/4.0	8.4±0.4	4.0±0.2	0.21±0.05	0.42±0.1	100
9.0/4.5	9.4±0.4	4.5±0.2	0.21±0.05	0.48±0.1	100
10/5.0	10.5±0.5	5.0±0.3	0.24±0.05	0.48±0.1	100
11/5.5	11.5±0.5	5.5±0.3	0.24±0.05	0.48±0.1	100
12/6.0	12.5±0.5	6.0±0.3	0.24±0.05	0.50±0.1	100
13/6.5	13.5±0.5	6.5±0.3	0.25±0.05	0.50±0.1	100
14/7.0	14.5±0.5	7.0±0.4	0.25±0.05	0.52±0.1	100
15/7.5	15.5±0.5	7.5±0.4	0.26±0.05	0.55±0.1	100
16/8.0	16.5±0.5	8.0±0.4	0.27±0.07	0.58±0.1	100
17/8.5	17.5±0.5	8.5±0.4	0.29±0.07	0.58±0.1	100
18/9.0	18.5±0.5	9.0±0.4	0.29±0.07	0.60±0.1	50
20/10	20.5±0.5	10±0.5	0.29±0.07	0.62±0.1	50
22/11	22.8±0.8	11±0.5	0.31±0.07	0.65±0.1	50
25/12.5	25.8±0.8	12.5±0.5	0.32±0.07	0.70±0.1	25
28/14	28.8±0.8	14±0.5	0.35±0.07	0.75±0.1	25
30/15	30.8±0.8	15±0.5	0.37±0.07	0.78±0.2	25
35/17.5	35.8±0.8	17.5±1.0	0.39±0.07	0.78±0.2	25
40/20	41±1.0	20±1.0	0.39±0.07	0.78±0.2	25
50/25	51±1.0	25±1.0	0.41±0.07	0.80±0.2	25
60/30	61±1.5	30±1.5	0.42±0.1	0.86±0.2	25
70/35	71±1.5	35±1.5	0.43±0.1	0.88±0.2	25
80/40	81±1.5	40±1.5	0.45±0.1	0.90±0.2	25
90/45	91±2.0	45±2.0	0.50±0.1	1.00±0.2	25
100/50	101±2.0	50±2.0	0.55±0.1	1.10±0.2	25
120/60	121±2.5	60±2.0	0.57±0.1	1.20±0.2	25
150/75	150±3.0	75±3.0